B-Display Installation
For: SuperJump, VTM and SplashEye


Never use the transmitter without the antenna attached

For jump measurement the display can by used with SuperJump, SplashEye or VTM.
It will also display numbers via a manual input direct from any computer with an app called Leine.

There is a mode switch on the side of the double sided displays. This toggles between flashing (brighter) and steady (a little dimmer)
In all cases the port number needs to be found and matched up with the software.
Email me if you have any questions or if you want to buy one
Converting old large displays
 SuperJump & Manual input
Follow instructions below

SplashEye
installation. Click here
VTM
Its here!
1 First insert the USB and install the drivers. They are in a folder called CP210x_VCP_Windows.
Click on either of the .exe files. If one doesn't work, your computer will need the other one. x64 or x86
2 Now drag the folders marked Display3K7 and Display 3K9 onto your desktop. Or anywhere else. The 2 folders contain exactly the same items, the only difference between the 2 is that the one marked K7 has the port defaulted to COM 7 and the one marked K9 is defaulted to COM 9. The COM number is easily changed. See steps 4 & 5 below.
The App to input numbers to transmit to the display is called 'leine+speed+k.EXE'
Use either version when you need to input numbers manually. (eg For slalom or for an unsupported jump program)
Follow these steps to make sure you have set the port correctly.
To use with SuperJump, only ensure that the port numbers match. See 6 below
3 Attach antennas to the display and to the Transmitter. If you have 2 different sized antennas, attach the bigger one to the transmitter
4 Now open the Device Manager on your computer and find out which port the transmitter is plugged into. In this example it is COM4. It may be different on your machine.
5

Now open Leine+speed App. At the top, the second icon from the right is a little cable.
Click on that and you will see a picture like the one above. Look at the port number. In this picture it is COM 9.
If you are using COM 4, then you need to change all the 9s to 4.

Highlight the first line.
Click on Andern.
In the drop down box, change to COM 4
Do the same for all the lines.
Now you are ready to go.
6 If you are using SuperJump, Make sure that you have selected LED in the options for Display type. Also ensure that the correct port is selected in the box at the bottom

Gosh. That was easy